Standard designs show frequently used
types of RTDs . See the model selection
chart to configure a RTD to your unique
specification.
R1-
DESIGN 11
This
is the most basic RTD configuration.
R1-
DESIGN 20
Silicon
impregnated fiberglass leads.
Alternate insulations available.
Transition on the RTD serves
as both a strain relief and
a moisture seal. Leads are flexible
and offer protection against
mechanical strain and chemical
corrosion.
T1-
DESIGN 23
Same
as design 20 with the addition
of interlocking stainless steel
armor on leads. This design
offers the maximum in mechanical
protection. There is a minimum
two and one-half inch bending
radius.
R1-
DESIGN 24
Same
as Design 23 with the addition
of a quick-disconnect connector.
(Connector has a maximum 400°
F operating limit.) High temp
available upon request.
R1-
DESIGN 26
Same
as design 20 with additional
stainless steel overbraiding.
Mechanical protection is provided
along with maximum flexibility.
R1-
DESIGN 46
Same
as design 40 without connection
head.
R1-
DESIGN 47
Same
as design 41 without connection
head. Includes spring loading
in hex nipple. d = 1/4 "
only.
